Om een beeld te geven van ons assortiment zullen we hieronder enkele producten toelichten, voor meer informatie kunt u contact met ons opnemen. DC IV De DC IV heeft een dubbel snelheidsbereik voor lassen en snijden omdat gekozen kan worden uit twee soorten tandwieloverbrenging. Omdat ook de motoroverbrenging in drie varianten verkrijgbaar is, is de DC IV daarom in zes snelheidsbereiken voor specifieke doeleinden te bestellen. Deze machine heeft een krachtige motor die zorgt voor veel trekkracht. HOB-O De HOB-O lichtgewicht precisie gaten snijmachine werkt eenvoudig en is gemakkelijk hanteerbaar. De HOB-O is eenvoudig te centreren op het werktstuk. Het enige wat hiervoor nodig is een centerpunt-markering. Deze vlamsnijmachine kan gaten snijden van 25 mm tot 200 mm binnenmaat en van 168 mm tot 1220 mm buitenmaat. Wanneer magneten gebruikt worden voor de montage, zijn deze afgeschermd tegen de hitte van de vlam. CB-1P Plasma Cirkel Snijmachine De CB-1P cirkel snijmachine voor het plasmasnijden van gebevelde snedes in buizen of vaten met een dunne wand met een maximale dikte tot 7 mm (5/16"). De machine wordt geleverd met een Thermal Dynamics air plasmastroombron en toorts. De CB-1P moet gemonteerd worden op een wagen of houder.

CW-7 Pipe Welding Machine The CW-7A welding machine is suitable for submerged arc welding of nozzles in barrels. The machine is equipped as shown and can carry up to 27 kg. (60 lbs.) on welding wire. The unit is complete with wire feeder, torch and cabling. The CW-7 is attached with a 3-claw mandrell.

For carports, tents, and canopies, you want the preparation to be correct before the work goes to the construction site. Uprights, beams, roof profiles, and attachment points must align perfectly. With a Lumixz profile laser, you cut tubes, pipes, and profiles from a single cutting file. Mounting holes, miters, anchor points, slots, and cutouts are included directly. This ensures the frame comes out of the machine better prepared, requiring fewer adjustments on site. ✓ Carports, tents, and canopies ✓ Bicycle shelters ✓ Verandas ✓ Garden gazebos ✓ Outdoor frames and supports Read more about laser cutting machines for outdoor structures

Bull XXL Flatbed Laser with Bridge The patented technology applied to this gantry fiber laser cutting machine ensures a high degree of reach and accuracy. The machine consists of a solid base frame and a robust gantry, on which the laser source, power cabinet, and cutting head are all mounted. The gantry is shielded and equipped with a housing and safety sensors. Relatively speaking, the Bull has a high travel speed (80 m/min) and acceleration speed (0.8 G). Advanced Software Smart Manager (SM) 5.0 is equipped with our database of cutting parameters. The cutting parameters can be adjusted in real-time during cutting to achieve the desired quality. The software features various piercing parameters that can be set up to 25 layers. Furthermore, SM 5.0 has optimized multiple piercing modes, such as continuous piercing, pulse piercing, blast piercing, etc. The FrogJump function has been upgraded, resulting in even smoother movement and zero pause. With SM5.0, production efficiency can be improved by more than 25%. Stable Performance. The Bull is also equipped with an IPG Bron and Precitec Procutter 2.0 cutting head. Naturally, with all the warranty and support you can expect in Europe. The mechanical construction of the machine is functional, robust, and simple. Reliable. Optimized and well-designed cutting bed, in collaboration with the Italian SmartCae center. Analysis with the Nastran Sol200 Protocol system. This allows us to significantly improve dynamic performance. Heat treatment and thermal protection reduce heat absorption by the frame and guarantee the precision of the machine during prolonged use.

Suitable for cutting, pressing, punching & stamping. Can be equipped with our punch-tooling or customized tools as well.

Make the work preparation of metal, sheet metal parts and tubes faster and easier with Calculate. Our advanced calculation software streamlines the entire process from request to production. The calculation software for metalworking for making accurate price calculations. Extract all data from the geometry of both 2D and 3D drawings, optimize material use and save time with fast and accurate cost calculations. Calculate can be configured entirely according to your own wishes and can be connected to any ERP system. The integration with the SpaceClaim CAD engine makes it possible to make immediate adjustments to the geometry. Making price calculations for production quotes can be time-consuming. Accurate calculations are important for planners to guarantee quality. Calculate reduces the calculation time from 16 hours to 60 minutes. That’s no less than 93% faster! Work preparation becomes easier and more efficient. Calculate works quickly and accurately and saves a lot of manual work. This drastically reduces the chance of errors.

Prefer to outsource the calibration of your geometric measuring instruments? Calibration Centre Netherlands is ready to assist you, both at your premises and in our lab. What do we calibrate? From pressure gauges to installation testers, from calipers to thermometers. Below is a small selection from our scope: - Setting gauges/rings - Calibers - Vernier calipers - Micrometers - Dial indicators/Swivel gauges - Squares - And much more. Is your measuring instrument not listed above? Contact us to discuss the possibilities. We'll be at booth I27, or email/call us. On-site calibration? No problem! Are you absolutely essential to your measuring instruments or do you have too many items to ship? We have mobile calibration setups that allow us to perform calibrations on-site. This saves you time and transport costs, and minimizes the risk of damage to sensitive measuring instruments. Why choose Calibratie Centrum Nederland? - Our master meters are ISO 17025 calibrated - We are ISO 9001 certified - Short turnaround times - On-site calibration is possible Visit us at Stand I27 to meet us and ask any questions. Or email us at info@kalibratiecentrum.nl or call us at +31 85 222 0500.

CalQore is a software platform for sheet, tube, and profile processing that connects estimating, work preparation, and production. It stems from over forty years of combined practical experience from AESC and was developed in collaboration with manufacturing companies. While companies work with separate software, spreadsheets, and manual transfers, CalQore brings the process together in a single connected, local environment. Setup is performed via a guided seven-step process, covering company profiles, machines, materials, operations, and CAD/CAM connections. This allows a company to get started quickly based on its own rules. A user drags a STEP, DXF, DSTV, or PDF file into the system. CalQore reads geometry and document information, recognizes sheet, tube, or profile, and combines drawings, estimating, and work preparation. In addition, CalQore Vision (beta) imports supplier drawings and orders completely offline and traceable, eliminating the need for manual data entry. The integrated welding tool also stands out. Based on a 3D model, CalQore recognizes weld seams and the system determines the type of weld, such as fillet weld, butt weld, or T-joint. Length, position, accessibility, processing time, and manufacturability risks are taken into account, ensuring that welding work is no longer estimated by feel. True-shape nesting with automatic scrap credit calculates using the actual shape rather than an estimate, ensuring accurate material costs. The cost price builds up per operation, is verifiable, and includes an audit process, after which the user determines the markup to establish the selling price. The application is supported by CalQi, a local AI consultant that monitors and advises in five languages, while sensitive business data remains on the user's own machine. CalQore is not a standalone calculation tool, but a connecting platform that captures knowledge, accelerates processes, and automates the entire process from inquiry to production.

Designed for bending and straightening large profiles, bars and beams, with precise alignment and adjustable pressure.

This cantilever racking system is the solution for those who need strength and flexibility. Hot-rolled steel, adjustable arms, and a seamless fit for any work environment. Build smart, work with trust.

Whether you are in a warehouse, shop, or workshop, this cantilever racking system is built for every situation. Adjustable hook arms? Check. Lightweight and robust? Double check. No frills, just maximum functionality. The all-round solution that saves you space and money.

The perfect solution for your workplace. Suitable for long goods and a stock of smaller products. No front yokes for maximum flexibility. Big or small, it all fits.

Make optimal use of your outdoor area, safe, stable, and resistant to all weather conditions. That is exactly what this setup offers: maximum freedom, minimal worries.

De Carif 260 AUTO is de meest compacte automatische lintzaag op de markt, met een vloeroppervlak van 1,5 m² (17 vierkante voet). Ontworpen om de opstellingstijd te minimaliseren en gemakkelijk te bedienen, snel te schakelen tussen semi-automatische en automatische snijmodus.