As an (Inter)national Service Technician at Q-Fin, you ensure that our finishing and handling machines keep running smoothly. You install and commission equipment, troubleshoot issues, and help customers optimize their processes. You’ll be on the road a lot, working independently on-site, and have the freedom to make technical decisions. No two days are the same, but one thing remains constant: you make sure it works.

The 'AD' in AD International stands for Advanced Development: advanced chemistry, in-depth knowledge, and continuous innovation. With expert and driven colleagues, we continue to improve our processes and develop solutions that meet our customers' needs, both today and tomorrow.

For the Southwest Netherlands region, Camfil is seeking an enterprising and enthusiastic Account Manager Clean Air Solutions. Do you want to work for a global leader in air filtration and contribute to a healthier, more sustainable world? Are you a commercial professional who thrives on customer contact, technology, and creating new opportunities? Then this is your next step. Your challenge: As an Account Manager, you are the face of Camfil in your region. You will further build strong customer relationships and help organizations with innovative air filtration solutions that contribute to a healthier living and working environment. In the initial period, the focus will be on maintaining and further developing existing clients. Once you are fully settled in, you will have ample room to explore new markets and create commercial opportunities. In short: a challenging field sales position with plenty of freedom, responsibility, and room for entrepreneurship.

EMS is currently looking to hire a full-time Application Engineer in the Benelux. This position offers a number of stimulating technical challenges, more specifically:  - You will be required to gain an in-depth knowledge of our solutions so that you

Due to our strong growth in recent years, we are looking for enthusiastic, motivated and eager to learn new colleagues. You will learn all activities directly in practice. This can be in the office, at customers, suppliers or partners. Service is a top priority at Widenhorn! Certainly also during installation, implementations and training.

Do you write PLC code, get a kick out of motion control, and want to do more with robotics, vision, and AI? At Q-Fin, we build smart machines and complete lines for automated finishing and handling. Technology you can really make a difference in. You contribute ideas, help build the systems, and ultimately see your software running in real-world applications. You’ll join a dynamic team that’s driven to move forward. With room for your own ideas, technical depth, and projects you can be proud of. Curious about what that feels like? Just stop by.

Are you a CNC miller who enjoys working with the latest machinery and has an eye for precision? At Bayards Aluminium Solutions, you will have the opportunity to make high-quality products for the luxury yacht building and defence industries, among others, while learning and growing in an innovative environment.

Will you be our commercial hero(ine)? At Lastafelshop, we are proud of our growth, and we are determined to grow even further! That is why we are looking for a driven commercial employee to ensure our commercial processes run smoothly. Are you the person who turns prospects into customers and customers into loyal relationships? Do you want to give your commercial talent room to grow in an ambitious manufacturing company? And achieve great results together with a small team? Then read on! https://lastafelshop.com/vacature-commerciele-manus-van-alles-mv/

The need for clean air in schools, offices, hospitals, restaurants, buildings, factories, and other places is greater than ever. As a result, we at Camfil are short-handed! Would you like to come help us and do your part to improve air quality? Are you a good listener and communicator, and do you want to make the most of every customer interaction? Then you’re more than welcome at Camfil!

Will you be our new driver? Full- and part-time opportunities (minimum 32 hours). Based in Ede. Your main responsibility as a driver is to deliver and pick up (service calls) our air filters for our customers throughout the Netherlands. Every morning, you’ll leave Ede between 6 and 7 a.m. and drive to 12–18 customers. You’ll call the customer ahead of time to let them know you’re on your way. Sometimes you’ll need to unload at different buildings on the same property or take filters back with you. Depending on factors such as traffic, you’ll be back at the office between 3:00 and 5:00 p.m. Then you’ll unload the filters that were returned and, using a forklift, load the filters for the next day’s route.

Part-time (minimum 32 hours) and full-time opportunities. As a trainee technician at Camfil, you’ll assist our experienced technicians with the maintenance of air-handling units at our customers’ sites throughout the Netherlands. You’ll learn the trade on the job. Maintenance tasks primarily involve removing and installing air filters and fan drives, as well as cleaning air-handling units. You’ll be trained as a technician so that, over time, you can perform maintenance—both independently and as part of a team—on air handling systems in stores, offices, hospitals, cleanrooms, and various manufacturing facilities. As an experienced technician, you’ll work either independently or as part of a team.

Heading out into the wide world five days a week? Three weeks on and one week off (or every other week) traveling the world while working at the factory in Goes? Available on call for Service and working in Goes? All possibilities are open for discussion!

We are looking for a new colleague to fill the position of Inside Sales Account Manager. You will be assigned your own client base (existing customers) with whom you will maintain contact, actively seek out new customers, prepare quotes, contribute ideas for marketing campaigns to approach customers, and keep customer data up to date in our CRM system. In short, this is a role with plenty of customer contact and commercial challenges, in which you’ll have the freedom to perform your duties effectively. Of course, we’ll teach you everything you need to know about our products.

At Elektrolas, we continue to grow. More and more customers rely on us for maintenance, inspections, and rapid support in the event of breakdowns. To continue delivering this quality, we are expanding our service team with a junior service technician. We are looking for someone who is technically skilled, enjoys working with their hands, and wants to learn the trade in practice. No years of experience are required; we value motivation and a willingness to learn more.

Ben jij een ervaren lasser met passie voor het vak én het overbrengen van kennis? Voor het onze lasopleidingen zijn wij op zoek naar een enthousiaste lasinstructeur theorie en/of praktijk. Je verzorgt één avond per week les aan gemotiveerde cursisten die zich willen ontwikkelen binnen het lassen. De lessen vinden plaats van 18.30 uur tot 21.30 uur. Afhankelijk van jouw ervaring en voorkeur geef je theorielessen, praktijklessen of een combinatie hiervan. Wij zoeken iemand met praktijkervaring in de lastechniek en minimaal één niveau 4 lasdiploma in TIG, MIG/MAG of BMBE. Ervaring met lesgeven is mooi meegenomen, maar motivatie en vakkennis vinden wij minstens zo belangrijk. Wat bieden wij? - Werken met gemotiveerde cursisten - Mooie combinatie van praktijk en kennisoverdracht - Marktconforme vergoeding - Werken binnen een professioneel en enthousiast team Locatie: ROC Rivor Tijden: 18.30 – 21.30 uur (1 avond per week) Interesse of vragen? Neem gerust contact met ons op.